In daily life, the pvc tarpaulin is inevitably damaged. At this time, how should we deal with it?
There are two solutions to solve it.
1.We use glue to repair
Cut two pieces of tarpaulin by the size of the hole, bigger than the hole. It's better to round the edges of the tarpaulin so it won't stretch out easily. First mend the tarpaulin side, put the not coating side out when stick on the tarpaulin,it is for more wear-resistant. Evenly coated with glue, especially on the edge of a circle to be coated, and then paste the prepared tarpaulin, paste good feel uneasy if you can be coated at the seam again, safe and sound. It should be noted that the glue dries very quickly, as short as ten seconds, so the glue must be applied quickly. Turn it over and stick another piece on the other side of the tarp to ensure its firmness and prevent it from opening again. You are done.
2.we use tarpaulin tape
1. First of all, wipe the damaged surface of the tarpaulin. You can gently rub the damaged area with sandpaper, but pay attention not to wear off the waterproof layer.
2. Measure the size of the damaged position, cut out the appropriate tape section and paste it to the damaged area.
3. Smooth out the damaged position between the tape and the canvas, so that the tape and the tarpaulin are completely bonded together.
4. Finally, let it sit for 1 to 2 hours until the glue on the tape is completely bonded to the tarpaulin.
Contact Person: Mr. Clement
Tel: +86-13627132266